Product Feature; Safety Information - GYS GYSTECH 12/12 Betriebsanleitung

This manual contains important safety and operating instructions. Read this manual carefully
before using the charger for the first time and keep the manual in a safe place for future
reference.

PRODUCT FEATURE

GYSTECH 12.12 charges 12 V batteries from 2 Ah to 200 Ah, or provides maintenance charging for
12V batteries to 250Ah. The charger detects any battery with a voltage above 5 V. This product is
designed for charging SLA (sealed lead acid) batteries of various types i.e. WET/Flooded (Liquid
Electrolyte), GEL (Gelatin type Electrolyte, absorbed into the plates), AGM (Absorbed Glass Mat)
batteries.

SAFETY INFORMATION

- Do not use it for any other purposes
- Do not attempt to charge non rechargeable batteries
- Respect the rating of the fuse, which is indicated on the charger.
- Do not cover the charger while charging.
- The charger must be placed in such a way that the socket is accessible.
- Follow fuse size/type indicated on the charger.
- If the power supply cable is damaged it must be replaced by the manufacturer, its after-
sales department or by a qualified person in order to avoid danger.
- Before the charge, read the instructions. Disconnect the power supply before plugging or
un-plugging connexions on the battery. Warning : Explosive gas, avoid flames and
sparks. Insure a sufficient aeration while charging.
- Charging should be carried out in a well-ventilated, weather protected facility.
- Separate collection required. Do not throw in a domestic dustbin.
- This device can be used by children older than 8 and people with reduced physical,
sensory or mental capacities or without any experience, if they are properly supervised or
if instructions to use the device safely has been given and if the risks incurred have been
understood. Children must not play with the device. Cleaning and maintenance by the
user must not be done by children with no supervision.
CHARGING
Connection:
Before connecting or disconnecting the battery leads, the power cord should be removed from the
mains.
 Charging a battery connected to a vehicle:
• The positive "+" battery terminal usually has a larger diameter than the negative "-".
Charging of negative earthed battery:
• Connecting the black clamp to the "-" terminal, or to the chassis - making sure it's a safe
distance from the battery and fuel/exhaust pipe)
6