Intended Use; Before You Start; Setting Up The Shredder Safely; Operating The Shredder - Olympia PS 38 CD Bedienungsanleitung

Intended Use

The automatic shredder can shred paper and CDs inserted into the automatic insertion slots�
The material to be shredded must comply with the requirements stipulated in Technical Data�
The automatic shredder is not intended for shredding material which does not comply with the
requirements stipulated in the Technical Data (e�g� cardboard)� Any other use is considered
unintended use�

Before You Start

Read this operating manual through carefully, observing all the information contained
regarding handling and using the shredder� Keep the operating manual in a safe place
for future reference�
The following information should help to ensure that the shredder always functions as you expect
it to�
Keep ties away from the shredder�
Keep long hair away from the shred-
der�
Keep all loose pieces of clothing,
jewellery or other loose items away
from the shredder�

Setting up the Shredder Safely

The shredder only operates when the waste bin supplied is fitted.
c
aution
underside of the cutting mechanism has sharp edges and corners� Do not take hold
of the shredder from the underside�
1
Place the shredder onto the waste bin� The shredder latches audibly in place�
2
Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket�
3
Make sure the switch is set to its o
an easily accessible power socket�

Operating the Shredder

The shredder works using an automatic shredding mechanism� The optical sensor for automatic
infeed of material is in the centre of both insertion slots�
c
aution
touch the shredder on the underside when the shredder is in operation�
12
! Risk of injury through sharp edges on the cutting mechanism� The
ff
! Risk of injury through sharp edges on the cutting mechanism� NEVER
Never reach into the insertion slot�
Before starting to shred material, re-
move any staples, paper clips, rubber
bands or other foreign bodies from the
material concerned�
position and then connect the power adapter plug to