Indoor Unit - CO/Tech FT0203 Bedienungsanleitung

Indoor unit

Note:
• Make sure that the sensors are working before you connect the indoor unit to
the power supply.
• Make sure that the sensors are at least 3 m and no more than 30 m from
the indoor unit. If the sensors are too close or too far away, it may be difficult for
the indoor unit to receive the signals.
• When the indoor unit is turned on, an automatic search for nearby sensors will
begin (the symbol will be displayed). Do not press any buttons until all sensors
have been registered – otherwise, the search process will be discontinued.
The indoor unit can be powered either by batteries or by the mains electricity using
the mains adapter provided.
Battery operation
1. Press in the catch and remove
the battery cover.
3. Refit the battery cover.
Mains operation
• Connect the mains adapter to the socket
marked DC 6.0 V and to a 230 V
wall socket. "AC ON" will appear on
the display for 3 seconds.
• If the mains adapter is removed, and
the weather station reverts to battery
power, the display will show "AC OFF."
• The mains adapter must be unplugged
during heavy thunderstorms in order to
protect the weather station.
2. Insert 3 × AAA/LR03 batteries.
Check the polarity markings in
the battery compartment to ensure
batteries are inserted correctly.
11