Operation; Troubleshooting - auna Line 700-A Anleitung

1 . Press the key VOL+/- on the rear panel or the key VOL+/- on the remote control to adjust the set-
ting of main volume control to you listening level.
2 . Press the key INPUT on the rear panel or the key on the remote control to select AUX/BT/OPTICAL/
COAXIAL mode .
3 . Press the PREV/NEXT key on the remote control to select previous or next.
4 . Press the key BASS+/- on the remote control to select BASS- or BASS+.
5 . Press the key TREBLE+/- on the remote control to select TREBLE- or TREBLE+.
6 . Press the key DISCONNECT on the remote to disconnect the BT.
BT connection
• Turn off any BT devices previously paired (linked) with this unit.
• Turn on the BT features on your phone or music player.
• Turn on and set this unit in the BT mode .
• Set your phone or music players to search for BT devices.
• Select "Line 700" from search results on your phone or music player.
• Select OK or Yes to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey. Steady BT light indicates successful connection.
• Long press the BT key on the front panel to disconnect previous device and enter pairing mode.
Problem
No power
No sound
The remote control
won' t work
No sound from
in BT mode

Operation

Troubleshooting

What to do
Check the connection of the AC/DC adapter
between the tower speaker and wall outlet .
Check that the volume control is NOT at minimum .
Check that it is NOT set to mute .
Inspect or replace the battery.
The remote control will not work Make sure there are
no obstacles obscuring .
Check if you have pairing or not. It needs to pair
the external BT player and the tower speaker with
password „0000" before 1 time listening .
st
17