Technical Data - Grizzly BRM 46-150 BSA InStart Originalbetriebsanleitung

Technical data

Petrol lawn mower
......................... BRM 46-150 BSA InStart
Performance (P) .............................2,2 kW
Engine ..... Briggs & Stratton 575 IS Series
Engine size (V) ............................. 150 cm
Blade rotation speed (n
Blade torque ................................... 45 Nm
Wheel drive............................... ca. 3 km/h
Petrol tank volume .............................. 0,8 l
Octane rating ....................................95-98
Engine oil tank volume ................... 470 ml
Motoroil ..................HD SAE 30 or 10W-30
Spark plug ..................Champion XC92YC
Cutting width ................................. 460 mm
Cutting height ............ 10-steps, 25-75 mm
Grass collection box volume................ 60 l
Weight (m) ..................................... 31.1 kg
Sound pressure level
(L
) ............................82,5 dB(A); K= 3 dB
pA
Sound power level (L
measured..............92,4 dB(A); K= 1,79 dB
guaranteed ..................................96 dB(A)
Vibration (a ) ............7,81 m/s
h
Battery (Li-Ion) ................. IS12B-593560
Nominal voltage ......................... 10,8 V
Capacity........................................ 1,45 Ah
Energy ......................................... 15,7 Wh
Charging time .................................ca. 1 h
Charger ............................. IS12C-593562
Uptake voltage/ Input
..................... 100-240 V~, 50/60 Hz, 0,8 A
Voltage output/Output ........ 12,45 V
Protection class .................................
Protection category............................IPX0
) .......... 2800 min
0
)
WA
; K=1,5 m/s
2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
3
ences and information of this instruction
-1
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
2
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
2 A
II
GB
117