Herunterladen Inhalt Inhalt Diese Seite drucken

Charge Level Indicator; Charging The Battery; Remove/Insert Battery; Used Batteries - Grizzly BRM 46-150 BSA InStart Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
surface is clean and dry.
There is a risk of injury due to
electric shock.
Only use the charger from the
package to charge the battery.
Mind not to charge the appliance
for more than 1 hour at a time. If
you do, the battery and the appli-
ance may be damaged and longer
charging times would be a waste
of energy. Excessive charging will
void the warranty.
Charge the battery before the first
time of use. Do not briefly charge the
battery several time in a row.
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM spare
battery available from our Customer
Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information.
The warranty excludes all defects
caused by improper handling.

Charge level indicator

Charge level indicator
on the battery:
The charging status of the batte-
ries can be read off on the charge
status indicator (35) by pressing
the button (36). The number of
illuminated LED lights shows the
charge level of the battery.
4 lights means battery is fully char-
ged,
1 light means battery must be
charged.

Charging the battery

Allow a freshly dis-charged battery
(8) to cool down for approx. 15
minutes before inserting it into the
battery charger (31).
1. If necessary, remove the battery
(8) from the machine.
2. To insert the battery (8) into the
charger push the battery along
the guide rail into the device.
You should be able to hear it
lock into place
3. To remove the battery from the
device, press the release but-
tons (37) on the battery (8) and
pull the battery out.

Remove/insert battery

1. If necessary, remove the battery
(8) from the charger.
2. To insert the battery (8) into the
lawn mower push the battery
along the guide rail into the ma-
chine.
You should be able to hear it
lock into place
3. To remove the battery from the
device, press the release but-
tons (37) on the battery (8) and
pull the battery out.

Used batteries

If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
GB
111

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Brm 51-163 bsa instart

Inhaltsverzeichnis