RCS DVD-200X Bedienungsanleitung Seite 35

DVD-200 X
MENU/PBC
Press during the playback of DVD/VCD/SVCD in order to display the main menu of the disc (MENU
PLAY). Press during the playback of VCD to turn on or off PBC.
Number buttons
Use these buttons for the input of track and chapter numbers. Press during playback to play the
respective files.
Arrow buttons
Use the arrow buttons to navigate through the different setup menus and menu settings. When dis-
playing pictures, you may use the buttons for the following functions:
DOWN: Flip the picture horizontal (LEFT-RIGHT)
UP: Flip the picture vertical (UP-DOWN)
RIGHT: Turn the picture 90 degrees clockwise (>>>)
LEFT: Turn the picture 90 degrees anti-clockwise (<<<)
N / P
Press this button repeatedly to adjust the system of the device. Each time pressing will change the
setting as follows: TV SYSTEM: PAL, TV SYSTEM: AUTO, TV SYSTEM: NTSC.
L/R
Press repeatedly during the playback of CD/VCD/SVCD/USB/CARD to change the audio channel
(CHANNEL: STEREO, CHANNEL: MONO R, CHANNEL: MONO L, CHANNEL: MIX MONO).
RETURN
Press during PBC mode to return to the main menu. When displaying pictures, return to the picture
menu.
OSD
Press repeatedly during playback to display different information of the respective disc, including
track, language, time, etc.
CLEAR
Press when entering digital values in order to delete digits.
PROGRAM
Press this button in stop or playback mode to display the program submenu. When you enter this
menu during playback and do not conduct any settings, you may press PLAY to return to normal
playback (PRG CANCEL).
Press this button in stop or playback mode to display the program submenu. You may program the
order of tracks (T) chapters (C) for playback. Use the arrow and number buttons. Press CLEAR to
delete a single input; click on CLEAR to delete all inputs. Click on PLAY to confirm the settings; play-
back of the first programmed track/chapter will start automatically (PRG PLAY). All programmed files
will be played repeatedly.
CD-Ripping
During CD playback, connect a USB device and switch it on. Press the button CD RIPPING; the rip-
ping menu RIP CD will be displayed on the TV screen. Use the arrow buttons for navigation.
Open the submenu OPTIONS. Use the arrow buttons to highlight the settings speed (SPEED), bit
rate (BITRATE), create playlist (CREATE PLAYLIST) or storage device (STORAGE) and change the
respective settings by repeatedly pressing the ENTER button.
Open the submenu TRACKS. You will see a table with all tracks on the CD checked. Press ENTER to
34.
35