RCS DVD-200X Bedienungsanleitung Seite 28

DVD-200 X
SETUP
Dear customer
The following functions refer to the settings and functions of the English on-screen display. If your
DVD player does not show the English menu by default, you may set the language as described
under SETUP (Language setup).
Press the SETUP button on the remote control to open the setup window with 6 menus.
System settings
In the menu SYSTEM SETUP you may adjust the settings TV system, screen saver, HDMI output,
aspect ratio, password and parental control or reset the device.
TV system
Use the arrow buttons to highlight TV SYSTEM and then to select one of the options. Press the
ENTER button to confirm.
Different TV systems are used in different regions; adjust the settings in accordance with your TV.
Screen saver
Use the arrow buttons to highlight SCREEN SAVER and then to
select one of the options. Press the ENTER button to confirm.
Activate the screen saver (ON) in order to protect the monitor.
When the device is idle for several minutes (without any func-
tion), the screen saver will be activated.
HDMI output
Use the arrow buttons to highlight HD OUTPUT and then to
select one of the options HD OFF, 70P, 1080I, or 1080P. Press
the ENTER button to confirm.
Mind the TV settings, as otherwise there will be no picture or a
distorted picture.
Video output
Use the arrow buttons to highlight VIDEO and then to select one
of the options. Press the ENTER button to confirm.
INTERLACE-YUV – TV connected to YCbCr output
TV-RGB – TV connected to SCART output
P-SCAN YPBPR – TV connected to YPbPr output
S-VIDEO – TV connected to S-Video output
Aspect ratio
Use the arrow buttons to highlight TV TYPE and then to select
one of the options. Press the ENTER button to confirm.
4:3 PS – Parts of the picture are cut off, for the picture to fill the
entire screen.
4:3 LB – Letter box format with black bars on the top and bottom
of the screen.
16:9 – Wide screen format.
Note: Some DVDs do not support the mentioned formats partly
or as a whole.
7.
28