DVD-200 X
Brightness
Use the arrow buttons to highlight BRIGHTNESS and then to
select one of the options. Press the ENTER button to confirm.
Follow the same procedure to adjust the other settings of this
menu.
Speaker setup
In the menu SPEAKER SETUP you may adjust the following settings.
Downmix
Use the arrow buttons to highlight DOWNMIX and then to select
one of the options. Press the ENTER button to confirm.
LT/RT – Using Dolby Prologic Decoder for extending -channel
to 4-channel sound.
STEREOTON – For listening to music or singing along (karaoke)
VSS – When using speaker systems for theater sound
AUS –.1 channel sound; output of signals from the left and
right soundtrack. Output of stereo signal during -channel
playback.
Subwoofer
Use the arrow buttons to highlight SUBWOOFER and then to
select one of the options. Press the ENTER button to confirm.
Activate (ON) or deactivate (OFF) this function, depending on
whether or not you have connected subwoofers to your system.
Center delay
Use the arrow buttons to highlight CENTER DELAY and then to
select one of the options. Press the ENTER button to confirm.
Adjust this setting according to the room setup.
Rear delay
Use the arrow buttons to highlight REAR DELAY and then to
select one of the options. Press the ENTER button to confirm.
Adjust this setting according to the room setup.
30.
31