RCS DVD-200X Bedienungsanleitung Seite 32

DVD-200 X
Front speaker
Use the arrow buttons to highlight FRONT and then to select
one of the options. Press the ENTER button to confirm.
Adjust this setting (MODE 1/ MODE ) according to the perfor-
mance of the front speaker.
Digital setup
In this menu you may adjust the settings operation mode, dynamic range and mono/stereo.
Operation mode
Use the arrow buttons to highlight OP MODE and then to select
one of the options. Press the ENTER button to confirm.
LINIE OUT: Playback very quiet (recommended night setting)
RF REMOD: Playback very loud (recommended day setting)
Dynamic range
Use the arrow buttons to highlight DYNAMIC RANGE and then
to select one of the options. Press the ENTER button to confirm.
When you have selected LINE OUT under OP MODE, you may
adjust the dynamic range for that setting in this menu.
Mono/Stereo
Use the arrow buttons to highlight DUAL MONO and then to
select one of the options. Press the ENTER button to confirm.
Adjust the mono and stereo settings according to the connected
devices and your preferences.
INSERT DISC/CONNECT USB DEVICE OR INSERT CARD
Disc: Use the OPEN/CLOSE button at the device or on the remote control to open the DVD
compartment. Insert a disc with the printed side facing up. Press OPEN/CLOSE to close the
compartment. The device will scan the disc (READ) and starts playback of the disc. The display
will show the playback symbol ►, the disc identification (DVD if DVD is inserted) and the elapsed
playback time. Note: The device will not play the disc if another mode is activated. Use the USB/
CARD button to enter the DISC mode (see below).
31.
32