Setting The Sleep Timer - Azusa URZ2057 Bedienungsanleitung

indicator will flash.
3. To switch off the SNOOZE function, press ON/OFF button (3).
You can then see the alarm indicator stop flashing, and the
alarm will not sound again after the snooze period elapses.

SETTING THE SLEEP TIMER

The sleep function allows the radio to play in blocks of 10, 20, 30,
40, 50, 60, 70, 80, or 90 minutes before turning off automatically,
then you can enjoy falling asleep when listening to the radio.
1. Turn on the radio.
2. Press the SLEEP button (9), then the LED shows 90 ( for 90
minutes ).
3. Press the SLEEP button (9) repeatedly until the display shows the
desired SLEEP time period. The time period is shown on the display
in sequence: 90 > 80 > 70 > 60 > 50 > 40 > 30 > 20 > 10 > OFF.
4. In 2 seconds after the desired SLEEP period is chosen, the display
will change to show the current time, and the radio will play for
the SLEEP time duration you have set and then be turned off
automatically.
5. Press the SLEEP button (9) again during SLEEP mode, the LED
will show the remaining time of the SLEEP period, and the SLEEP
time can be set again by following above step 3 & 4.
6. To switch off the SLEEP function during the SLEEP mode, follow
EN
above step 3 until "OFF" appears on the LED, then the SLEEP
function is canceled. The LED jumps back to show the radio
frequency and the radio will keep turned on until being turned off
manually.
SETTING THE SLEEP TIMER AND ALARM TOGETHER
1. If you want to set the SLEEP TIMER function and Alarm function
together, you must follow the ALARM SETTING procedure to
set the alarm first.
2. Turn on the radio, then follow the step 2 & 3 of SETTING THE
SLEEP TIMER.
automatically after the SLEEP time elapse, and then wake you
up at your set alarm time.
20
Owner's manual
Consequently, the radio will be turned off