Alarm Setting - Azusa URZ2057 Bedienungsanleitung

wake to buzzer. When an alarm is set to waking up to radio, please
be reminded to select the desired band, station and volume level
before turning off the radio.

ALARM SETTING

1. To set the alarm time, the radio must be turned off.
2. Press ALARM 1 button (1) once, the alarm time and either
Alarm 1 Buzzer indicator (11) or Alarm 1 Radio indicator (12)
is flashing.
3. Press HOUR button (8) for selecting hour. Press MINUTE
button (7) for selecting minutes.
4. After setting the desired alarm time, either press ALARM 1
button (1) again, or simply wait for 5 seconds, then the display
will return to the current time and the set alarm time is confirmed.
5. Now press ALARM 1 button (1) repeatedly to choose the alarm
function status. The status appears in following sequence with
display shown as:
a. Alarm wake to buzzer is set with Alarm 1 Buzzer indicator
(11) and Alarm time is flashing on the display.
b. Alarm wake to radio is set with Alarm 1 Radio indicator (12)
and Alarm time is flashing on the display.
c. Alarm off is set with no indicator is on and current time
shown on LED.
EN
5 seconds after the desired status is chosen, the display will stop
flashing and change to show the current time. Please make sure
the indicator for the selected status (buzzer or radio) is ON, or no
indicator is on in case if you choose to turn off the alarm.
6. When you set the time for Alarm 2, follow the above step 2 to
5 by using the ALARM 2 button (2) instead of ALARM 1 button
(1). Subsequently, the wake to buzzer status of alarm time 2
will be indicated by Alarm 2 Buzzer indicator (14). The wake to
radio status of alarm time 2 will be indicated by Alarm 2 Radio
indicator (15). The buzzer sound of Alarm 1 is in different
tone with the buzzer sound of Alarm 2, so it is easy for user to
distinguish.
18
Owner's manual