Azusa URZ2057 Bedienungsanleitung Seite 19

7. When the Alarm is turned on, either:
a. Press ON/OFF button (3) or Alarm 1 button (1) once to
switch off the alarm 1. Press ON/OFF button (3) or Alarm 2
button (2) once to switch off the alarm 2. The alarm indicator
is still on, implying the alarm function is still activated and
turned on again after 24 hours.
b. Press the SNOOZE button (9), the alarm sounds will stop
temporarily for 9 minutes and will sound again after. [See
SNOOZE SETTING below]
c. If no button is pressed after the alarm sounds, the alarm
will keep turned on and then turned off in 1 hour after the
alarm time.
d. To disable the alarm setting, press ALARM 1 button (1) or
ALARM 2 button (2) until their indicators (radio or buzzer)
disappear on the display.
Notes
• The ALARM 1 (or 2) indicator flashes in the display when the
alarm sounds.
• If a later alarm starts to sound when the earlier alarm still sounds,
then the later alarm takes priority.
• If a later alarm sounds when the earlier alarm is under SNOOZE
period, then the later alarm takes priority and will cancel the
SNOOZE function of the earlier alarm automatically.
• If the same time is set for both alarm (ALARM 1 or 2). The
ALARM 2 takes priority.
SNOOZE SETTING
Once the alarm is activated, the snooze function can be used to
stop the alarm temporary for about 9 minutes and then alarm will
sound again.
1. Once alarm (either Alarm 1 or Alarm 2) sounds, press the
SNOOZE button (9), the buzzer or radio alarm sounds will stop
and will sound again after 9 minutes. The SNOOZE function
can maintain valid within 1 hour from the set alarm time.
2. During the time when SNOOZE function is activated, the alarm
Owner's manual
EN
19