Azusa URZ2057 Bedienungsanleitung Seite 15

Note: Volume range: 00 (mute) to 16 (maximum)
4. Press TUN- button (8) or TUN+ button (7) to tune into the
desired station by either of the 2 following methods.
Manual Tuning:
Press either of the 2 tuning button, TU- button (8) or TU+ (7),
repeatedly until the desired station is reached.
For MW tuning, the radio can tune starting from 522 KHz to 1620
KHz, each pressing of TU- button (8) can tune down by 9 KHz and
each pressing of TU+ button (7) can tune up by 9KHz.
For FM tuning, the radio can tune starting from 87.5 MHz to 108
MHz, each pressing of TU- button (8) can tune down by 0.1 MHz
and each pressing of TU+ button (7) can tune up by 0.1 MHz.
Auto Scanning:
Press and hold either of the 2 tuning button, TU- button (8) or
TU+ (7) for more than 1 second and auto scan will be performed.
Scanning will stop automatically until a clear radio signal is found.
Repeat the same procedure by using the same button until your
desired station is found.
* To stop auto scanning, press any button once.
Note: In some area where the radio signal is not strong
enough, the scanning process may not be able to stop
automatically in the desired station. In such case, please use
the Manual Tuning method to tune the desired station. This
happens more probably when tuning the radio in MW band.
5. To turn off the radio, press and hold ON/OFF button (3) for more
than 1 second until the radio is turned off and the LED shows
the time.
Note 1: The current station (either MW or FM) and also the current
volume level will be memorized at the time when the radio is turned
off. Once you turn on the radio again, the memorized station will
Owner's manual
EN
15