Axis 215 PTZ Installationsanleitung Seite 9

AXIS 215 PTZ Installation Guide
13. Using the supplied screwdriver, attach the smaller dome cover, using the 2 M4x10
resitorx screws.
M4x10 resitorx
screw
Replacing the dome glass
The dome cover can be fitted with the clear or
the smoked plastic glass. To switch covers, use a
torx T6 screwdriver to remove the 4 fastening
screws on the inside of the dome, as shown here.
You are advised to take care when handling the
plastic glass, to avoid scratching it. The wearing
of cotton gloves is recommended.
Page 9