Axis 215 PTZ Installationsanleitung Seite 5

AXIS 215 PTZ Installation Guide
Weights
• Camera: 0.60kg (1.32lb)
• Drop ceiling mount 0.54kg (1.19lb)
• Drop ceiling cover 0.12kg (0.26lb)
• Surface mount cover 0.13kg (0.29lb)
• Power adapter, including mains cable: 0.43kg (0.95lb)
Connectors & buttons
Position 0 °
I/O terminal
connector
(see page 16)
Mounting
!
IMPORTANT! - The AXIS 215 PTZ is designed for indoor and outdoor use. To
use the camera outdoors, it must be installed in an approved outdoor housing.
Please see www.axis.com for more information on outdoor housings.
The AXIS 215 PTZ can be mounted in 2 different ways:
• Surface mounted on a hard ceiling, in which case the unit is fastened directly to the
ceiling material
• Recessed in a drop ceiling, which involves cutting a hole in the ceiling and using
the supplied drop ceiling mount
The front position
The AXIS 215 PTZ can pan (swivel) ±180° from position 0°, i.e. the metal tab to the left of
the connectors, as illustrated above. This position can be thought of as the "front" of the
camera, and is the point to which the camera will return whenever it is (re)started.
Audio in Status, Network & Power
Indicator LEDs (see
Audio out
page 17)
Page 5
Power connector
(see page 16)
Control button
Network connector
(see page 16)