Axis 215 PTZ Installationsanleitung Seite 8

Page 8
Note:
It is important that the camera is centered within the inner ceiling bracket. The
distance between the camera and the rim of the inner ceiling bracket must be
equal on all sides. Measure an equal distance between the camera and the tabs on
either side of the inner ceiling bracket. Visually ensure the centering.
Camera must be centered within the inner ceiling bracket
distance between
camera and bracket
tab
6. Adjust the length of the
supplied safety wire and attach
it to both the inner bracket and
the hard ceiling above the drop
ceiling.
7. Connect the camera to the
network using a shielded
network cable.
8. Optionally connect external
input/output devices, e.g.
alarm devices. See page 15 for
information on the terminal
connector pins.
9. Optionally connect an active
speaker and/or external
microphone.
10. Connect the supplied indoor
power supply to the power
connector on the camera.
11. Lift and turn the inner bracket
(with camera) so that the
screws on the outer bracket
enter the screw slots on the
inner bracket. Make sure that
the screws go all the way to
the back of the slots.
tab
distance between
camera and bracket
Align slots
with screws
AXIS 215 PTZ Installation Guide
Distance between camera
and tab must be equal
Safety wire
M4x4 screw