Axis 215 PTZ Installationsanleitung Seite 5

AXIS 215 PTZ Installation Guide
Weights
• Camera: 0.60kg (1.32lb)
• Drop ceiling mount 0.54kg (1.19lb)
• Drop ceiling cover 0.12kg (0.26lb)
• Surface mount cover 0.13kg (0.29lb)
• Power adapter, including mains cable: 0.43kg (0.95lb)
Connectors & buttons
Position 0 °
I/O terminal
connector
(see page 15)
Mounting
!
IMPORTANT! - The AXIS 215 PTZ is designed for indoor and outdoor use. To
use the camera outdoors, it must be installed in an approved outdoor housing.
Please see www.axis.com for more information on outdoor housings.
Do not use the camera's dome bubble if it is to be installed in an outdoor
housing as the use of two dome bubbles will reduce the image quality and
cause image blurring.
The front position
The AXIS 215 PTZ can pan (swivel) ±180° from position 0°, i.e. the metal tab to the left of
the connectors, as illustrated above. This position can be thought of as the "front" of the
camera, and is the point to which the camera will return whenever it is (re)started.
Audio in Status, Network & Power
Indicator LEDs (see
Audio out
page 16)
Page 5
Power connector
(see page 15)
Control button
Network connector
(see page 15)