Additional Functions - auna KR-100 Bedienungsanleitung

• Press SLEEP/TIMER to activate the timer function.
• Use the arrow buttons to set the timer duration (01-99 minutes). Press PLAY/PAUSE to start the timer.
• The countdown will be shown for a short moment on the display as the timer is activated. After the set
time, the beeper will sound.
• To stop the beeper sound and resume the normal operation, press ALARM/SNOOZE or press the
standby button to switch the radio to standby.
• To check the remaining time during timer on, press SLEEP/TIMER.
• To reset or cancel the timer, press the SLEEP/TIMER button once, then adjust the timer with the arrow
buttons. Press PLAY/PAUSE to confirm your settings.
• Press and hold SLEEP/TIMER to activate the timer function.
• Use the arrow buttons to adjust the sleep time (Sleep off > 15 > 30 > 45 > 60 > 90 > Sleep off). Press
PLAY/PAUSE to confirm. The sleep icon will appear on the display to indicate the active sleep function.
• After set time, the device switches to standby automatically.
• To reset or cancel the timer, press and hold SLEEP/TIMER, and when the display shows "Set sleep
time", repeatedly press the arrow buttons followed by pressing PLAY/PAUSE to reset and confirm the
sleep time again.
You can set two individual alarm timers.
• Press ALARM/SNOOZE to enter alarm 1 setup menu. Press and hold ALARM/SNOOZE for alarm 2 setup.
• Press PLAY/PAUSE and set the ON TIME first: Use the arrow buttons and PLAY/PAUSE to set the time
your alarm shall ring. Confirm by pressing PLAY/PAUSE.
• After the time is set, continue with the alarm settings, all to be set via arrow buttons and PLAY/PAUSE:
• Alarm duration (15/30/45/60/90/120 minutes)
• Alarm source (buzzer/DAB/FM)
• Alarm interval (daily/once/weekends/weekdays)
• Alarm volume level
• Alarm on/off

Additional Functions

Timer (egg timer)
SLEEP
Alarm
15
www.auna.de