Diehl Metering SCYLAR INT M Installations- Und Bedienungsanleitung Seite 29

Installation Guide
Exchange of the device
Thereafter the calculator can be removed from the wall. Hold the calculator close to the bottom with
3)
both hands and lift it off the wall. The connecting clips first come off on the lower part of the DIN rail
(top-hat rail)
Remove the connecting plate of the new calculator and screw it onto the old calculator.
4)
The new calculator can now be mounted. Clip the connecting clips into the upper part of the rail and
5)
then press the calculator entirely into the rail.
Insert the connecting plate with its cables and their plugs into the calculator and re-fix it with the 4
6)
screws.
Thereafter the connecting plugs can be reconnected. The power supply is plugged in at last.
7)
V 1.8 29 / 64