Control Device; Display Messages - Viessmann TECTOPROMO SV2 Deli Bedienungsanleitung

PI

4.4. Control device

The type of the control device depends on the cabinet. All features are not available on every
cabinet.

4.4.1. Display messages

In normal status, the display shows cabinet temperature.
Defrosting signals
Defrosting under way.
Probe failure alarm signals
Control probe failure.
Contact service.
Condenser temperature
probe failure. Contact service.
Cabinet failure alarm signals (condenser overheat)
The compressors are switched off due to overheating. Check
the condenser first and clean it by opening the hatch from
the base and vacuuming the condenser, if needed. If the fault
persists, contact service.
Original instructions
Evaporator probe failure.
Contact service.
ENGLISH
Cabinet probe failure.
Contact service.
7