Velleman VTSS6 Bedienungsanleitung Seite 4

VTSS6
Do not crimp the power cord and protect it against
damage.
Warning! If the power cord is damaged, it must be
replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed
the voltage stated in the specifications of this manual.
Plug the power cord into a suitable, earthed mains
outlet.
Risk of electroshock when opening the cover.
Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the housing
yourself. Have the device repaired by qualified
personnel.
Do not operate the device with wet hands.
Always disconnect mains power when the device is not
in use or when servicing or maintenance activities are
performed. Handle the power cord by the plug only.
Caution! After switching off, leave the power cord
plugged in for a few minutes. When you switch off the
unit, the automatic cooling function blows cooling air
through the heater pipe for a short period. This
protects the heater from damage and extends its
lifetime. Do not disconnect the mains plug during this
cooling process.
Indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids. Never put
objects filled with liquids on top of or close to the
device.
Do not use near inflammable products or in explosive
atmospheres. Heat can cause fire to inflammable
products even when they are not in sight. Only use in
properly ventilated rooms.
V. 03 – 24/11/2014 4 ©Velleman nv