Velleman VTSS6 Bedienungsanleitung Seite 5

Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can
cause serious burns. Keep the tips and hot air away
from the body, clothes, or other flammable material.
Do not aim the hot air gun at the eyes. Use gloves
and/or heat-resistant tools to pick up the PCB assembly
to prevent burns. Always return the irons and gun to
their stands between uses; always let the device cool
down after use and before storage.
Place the device on a level, stable, and fire resistant
working surface.
Do not inhale solder fumes. The vapours that are
released during soldering are harmful. Therefore, you
shall only use the soldering station in well-ventilated
areas or under an exhaust hood (solder fume
extractor). Dispose of fume filters and solder residue in
accordance with local regulations.
Never use the device on live electronic circuits. Make
sure power to the work piece is cut and capacitors are
discharged.
Do not block the hot air gun nozzle. This may cause
heat reflection and may damage the heating element.
Warning! This tool must be placed on its stand when
not in use; do not leave the tool unattended when
switched on.
 Use the soldering iron on a heatproof workbench.
 Place the soldering iron in its holder after use.
 Let a hot soldering iron cool down naturally and do not immerse in
water.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
V. 03 – 24/11/2014
VTSS6
5 ©Velleman nv