Instructions And Faq - hager RTS001X Anleitung

RTS001X

Instructions and FAQ

Side note - Audio settings in the RTN300X/301X IP door speaker
Audio settings for Android tablets in RTN300X IP door speaker
Side note - video settings for IP cameras/server
www.hager.com
Video settings in
RTN500X and AXIS
IP camera/server
Subject to technical changes
At the factory, the RTN300X/
301X IP door speaker is set
to audio values that have
been tested as suitable in
combination with different
devices (smart phones,
touch panels and IP tel-
ephones). Depending on
local conditions and the
device used, it may be nec-
essary to make changes
here.
You can get to the au-
dio configuration of the
RTN300X/301X via "Quick
start / Communication"
or "Expert configuration /
Communication"
If many devices are used
in parallel for IP video door
communication, a call can
lead to increased camera or
network load, since all de-
vices involved will request
the video stream simultane-
ously.
It is therefore recommended
that the video frame rate be
reduced and JPG compres-
sion increased in order to
compensate for bandwidth
problems. (This is particu-
larly true of HD resolutions
greater than 640x480
pixels.)
On the RTN500X, the com-
pression is defined on the
value X. For the AXIS, it is
around the value X.
You can get to the video
settings of the RTN500X
via "Quick start / Image
settings" or "Expert / Image
settings".
25