hager RTS001X Anleitung Seite 21

RTS001X
User interface and other adaptations
Functional status of the buttons
Function is not available.
Functional combinations (no call established)
+
Call the door assigned to the
camera.
Functions (on incoming call)
Call is rejected.
Door call not accepted quickly enough
If a door call has not been answered within the time defined in the door module, a con-
nection to the door can be established simply by pressing the corresponding camera
and speaker button.
Camera switching during a call (mode: video outside station)
If you would like to call up other IP cameras/servers defined in Videofon while the visi-
tor is still in the entryway, then use the camera buttons to switch to the desired video
stream. This also works during the call.
Mute ring tone
The ringtone of the Videofon client is muted by pressing the "Mute" button in standby
mode. The application minimized in the Tasktray is displayed, however.
www.hager.com
Function is available and can
be selected.
+
Open the door assigned to the cam-
era without establishing a call.
Door is opened without accepting a
call (and the system hangs up again
if "Hang up after opening door" is
checked)
Subject to technical changes
Function is active and
will be executed.
+
Turn on the lighting assigned to the camera
without establishing a call.
Call acceptance and turn on the lights at
the door calling. Call is not ended.
+
Call the door assigned to the
camera.
Switch video stream.
>
Ringtone muted
21