Functional Description - Lehmannaudio Decade Bedienungsanleitung

38 Decade

Functional description

EN
In this chapter you will learn more about the connections,
controls and also the application possibilities of your
Lehmannaudio Decade phono stage.
Decade front panel
1
1 | Operating mode display (LED)
When the LED is lit up, the Decade is operational. The mains switch is located
on the PWX II power supply.
2 | Soft bass rolloff filter
Some records deliver too much low-frequency energy, in particular warped
records. To protect your speakers, it is advisable to activate the filter employed
in the Decade. The cutoff frequency is approx. 50 Hz with a steepness of 6 dB/
octave. The filter operation will be indicated by the corresponding LED.
High MC
2 3 4
3 | High gain switch
With this switch you can boost the gain for MM as well as MC systems by 10 dB.
The high gain mode will be indicated by the corresponding LED.
4 | MC switch
With this switch you can select between 36 dB (MM) and 56 dB (MC) of gain.
The MC mode will be indicated by the corresponding LED.
Decade rear panel
6 7
5 | Ground terminal (GND)
If your record player has a separate ground cable, please connect it here. The
terminal is suitable for connecting a cable, flex, open cable ends, cable lug or
4 mm banana plug.
Decade
5
8 9 10
39
EN