Functional Description - Lehmannaudio Black Cube Bedienungsanleitung

36 Black Cube Statement
EN
Note
We recommend keeping the entire packaging for later shipment.
That way you will avoid transport damages. Use by no means
'foam chips' or similar packaging material. Otherwise the device
will jolt through to the bottom of the cardboard box during
transport and can be damaged! If the original packaging is no
longer available, it's best to use bubble wrap in which to wrap up
the device in a generous manner. Finally the whole should be put
into a solid cardboard box.
2 | Setup
Always position the Black Cube Statement on a stable surface. Thanks to the
compact dimensions and low weight, you can set up the Black Cube Statement
directly next to the record player.
3 | Connecting
Check whether the included mains adapter is suitable for connection to the
mains network used in your country. On the adapter, you will find information
about the specified mains voltage for the device. Now connect the Black Cube
Statement to the mains network using the external power supply and the con-
nection on the rear of the device.
Note the safety instructions starting on page 32!

Functional description

In this chapter you will learn more about the connections,
controls and also the application possibilities of your
Lehmannaudio Black Cube Statement phono stage.
Input
1
1 | Ground terminal (GND)
If your record player has a separate ground cable, please connect it here. The
terminal is suitable for connecting a cable, flex, open cable ends, cable lug or
4mm banana plug.
2 | Input jacks (IN)
Connect the cables coming from your record player to these jacks. The left jack
(black) is for the left channel, the right jack (red) for the right channel. Please be
sure to connect the channels correctly.
Black Cube Statement 37
EN
2