auna 10021816 Bedienungsanleitung Seite 28

Connection Between DVD Player and Speaker
1. Use the related cable to connect channel "R" at the place marked as "+" on
the DVD Player to the place with the same mark "+" on the speaker; Use the
related cable to connect channel "R" at the place marked as "-" on the DVD
Player to the place with the same mark "-" on the speaker.
2. In the same connection way as "1", make connections between the DVD
Player and the speaker for channel "L".
3. Before above connections, unplug the power cords for the player and
speaker.
Outside Video & Audio Using
1. Connect to the video and audio wite outside plauer.
Connect the outside Audio line "L"with the DVD Player "AUDIO IN--"L" jack.
Connect the outside Audio line "R"with the DVD Player "AUDIO IN--"R" jack.
2. After step1,plug in and press the Remote Control function key called
"SOURCE".
Function
Press the key Function, and the information below will appear on the screen:
treble:-7dB~+7dB
bass: -7dB~+7dB
Volume = 40dB
Note: Press the key Function, and the Player will enter the state for high-pitch
adjustment. You can use the key Volume on the panel or remote control to
adjust the volume for high pitch. Follow the same way to adjust the volume for
the speaker, DVD Player and low pitch.
19
28
28