System-Setup - auna 10021816 Bedienungsanleitung

System Setup
Select the key Set on the remote
control, and the setup interface
will appear on the screen.
1. The user can use the keys
"Up/Down/Left/Right" to make
selections. However, it would be
difficult to use the cursor of the
remote control to perform the
operation. You can press Enter/Play
to make the option, and press Left to
return to the previous interface.
2. Press Set to exit the setup interface.
Interface for Normal Settings
With this interface, you can set the
displaying format of the TV screen,
the video mode and all functions
relating to DVD contents.
A.TV Display
With this item, you can select the
displaying format of the TV screen
according to your preference. The
proportion of the displayed part on
the screen is subject to the nature
of the disk and of the TV (refer to
Page 20: Multiple Image Sizes).
In any selected displaying format,
a picture recorded with 4:3 proportion
will always be displayed with the same
width-height proportion.
In the case of DVD disk, the displaying
format might change. You can refer to the
related information for details. If the
System Setup
contents of DVD disk are recorded
with 16:9 format and the TV displays
the image with proportion of 4:3, the
image will be compacted when
displayed.
Some DVD titles are recorded with
special format. In this case, whatever
displaying format the user selects,
the DVD titles with the original format
will be displayed on the screen.
B. Angle Mark
In playing the DVD contents, the user
can choose one camera angle from
the options to display the contents.
C. OSD Language
The user can set the OSD language
thorough this item.
D. Captions
For those suffering from hearing, the
supplementary narrations recorded
can be displayed on the screen.
10
18
18