Programming The Alarm Light (Sunrise) - Sonoro LOUNGE SO-320 Bedienungsanleitung

2. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm repetition is set.
9.5

Programming the alarm light (sunrise)

After you have set and confirmed the alarm repetition, you can set whether you would
also like to be woken with an alarm light (with sonoroLIGHT only) (Fig.29).
1. Ensure that sonoroLIGHT is connected and that its dimmer function is switched on.
Fig.29. Setting alarm light
2. Turn the click wheel to switch the alarm light on and off (Fig.29).
3. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm light is programmed.
If you would also like to be woken with an alarm light, the light is switched on before
the alarm goes off at the time you have set to ensure that it has reached the specified
brightness when the alarm goes off.
To set the alarm light please see: 'Setting alarm light' on page 80.
Example
Settings made:
• Alarm time: 07:00 a.m.
• Brightness: 15
• Timeframe: 30 min
At 06:30 a.m., the alarm light is switched on and the brightness is increased
gradually from level 0 to level 15 by 07:00 a.m.
80
© sonoro audio GmbH 2018