Sonoro LOUNGE SO-320 Bedienungsanleitung Seite 68

The procedure to set the individual functions is the same.
Setting the time manually
Fig.8. Setting the time manually
1. In Standby mode, press the [SETUP] button on the device or the remote control.
W The display shows the [Set Time] menu. (Fig.8)
2. Press the click wheel to set the hours.
W The hour display will flash.
3. Turn the click wheel to set the hours.
4. Press the click wheel to confirm the setting.
W The minute display will flash.
5. Turn the click wheel to set the minutes.
6. Press the click wheel to confirm the setting.
W The time is set.
Use the [Next] and [Previous] buttons to toggle between the hours and minutes
display.
After 10 seconds of inactivity, the device automatically switches to Standby mode
without saving the settings.
Setting the date manually
Fig.9. Setting the date
1. In Standby mode, press the [SETUP] button on the device or the remote control.
W The display shows the [Set Time] menu. (Fig.8)
68
© sonoro audio GmbH 2018