Cooking Utensils; Common Abnormalities - Mastercheff My Master Cooker Bedienungsanleitung

5. COOKING UTENSILS

Suitable cooking pots:
– Double-bottomed ferromagnetic pans (enamel, cast iron or stainless steel) or pans made
of flat-bottomed magnetic induction material with a diameter between 12 and 28 cm (part
in contact with the ceramic plate).
– To know if a utensil is ferromagnetic, place magnet on it. If it sticks, the utensil is ferro-
magnetic.
– Please refer to the cooking utensil manufacturer to confirm suitability for induction coo-
king.
6. COMMON ABNORMALITIES AND TROUBLESHOOTING
Abnormality codes:
Nº Abnormality
Receptacle mis-
1
sing or not sui-
table
Short circuit
2
3 Short circuit
4 Electric
load
5 Low electrical
supply
6 The product
does not heat
7 IGTB overheat
MANUAL My Master GO.indd 17
Mode Code
Stand E0 or indicator blinks Change the cookware.
by
E1 or indicator blinks Contact the Technical Support Service.
E2 or indicator blinks Contact the Technical Support Service.
over- E3 or indicator blinks Make sure the power supply matches
E4 or indicator blinks Make sure the power supply matches
E5 or indicator blinks
E6 or indicator blinks Let the appliance to cool down. If the
Solution
the specification from the appliance.
the specification from the appliance.
problem persists, contact the Techni-
cal Support Service.
My Master Cooker
ENGLISH
17
28/4/17 9:39