Teka HLB Bedienungsanleitung Seite 44

3. Switch the oven on, turning the left dial to
select the function and confirm with the
button.
4. An audible signal will be heard confirming
that the Teka Hydroclean
activated.
On the screen the
the remaining time the cycle needs to finish.
IMPORTANT
The duration of this cycle cannot be
changed. To stop before the completion of
the cycle, turn the oven off by pressing the
button .
44
User's Guide
feature has been
®
symbol will appear as will
5. When the cycle ends, the oven will turn itself
off, an audible signal will sound and the
symbol will flash quickly.
IMPORTANT
Do not open the oven door until the Hydro-
clean cycle has ended completely.
®
The cooling cycle is necessary for this fea-
ture to work properly.
6. Press any button with your fingertip to stop
the audible signal and to turn off the
symbol.
7. The oven will turn off automatically.
8. The oven is ready for dirt deposits and
excess water to be removed with the cloth.
The Hydroclean feature works at low tem-
®
peratures. However, cooling times can vary
according to room temperature.
WARNING
Before touching the inner surface of the oven
directly, make sure that the temperature
is not too hot.
If a deeper clean is required after running the
Hydroclean feature, use neutral detergents
®
and non-abrasive sponges.