Automatic Heat Up; Power Function - AEG HK764401PB Benutzerinformation

10 www.aeg.com

4.5 Automatic Heat Up

Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
Immediately touch a desired heat
setting. After 3 seconds
To deactivate the function: change the
heat setting.

4.6 Power function

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
4.7 Timer
You can set one timer function for each
cooking zone separately. To set a timer
function for the zones on the left side use
the timer on the left, for the zones on the
right, the timer on the right.
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
First set the heat setting for the cooking
zone and then set the function.
To activate the function or change the
time: touch
until the indicator
( comes on).
comes on.
. comes on.
quickly again and again
of a given zone
lights up on the display. Then touch
or to set the time (00 - 99 minutes).
The function starts automatically after 4
seconds. comes on the display.
To activate the timer function for the
second zone in a pair touch
quickly.
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
To see the remaining time: touch
To deactivate the function: choose the
desired zone touching
. The remaining time counts back to
00. The symbol goes out.
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a cooking zone operates.
To activate the function: for the first
zone in a pair touch
function starts automatically when
lights up. To activate the function for the
second zone in a pair touch
quickly.
To see how long the cooking zone
operates: touch . The display shows
the time, at first in seconds then in
minutes.
To deactivate the function: choose the
desired zone touching
. The symbol goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated but
the cooking zones do not operate.
To activate the function: touch
again and again until the indicator
a given zone lights up on the display.
Touch or to set the time. The
function starts automatically after 4
seconds. comes on the display.
3 times
to stop
.
and then touch
twice quickly. The
4 times
and then touch
quickly
of