Blaupunkt MX6000 Bedienungsanleitung Seite 18

Fig. 13
Telescoping pole
socket
2. While pressing the cutting head lock, align the grass shear + hedge trimmer with the pole head, and insert the grass shear +
hedge trimmer into the opening of the pole head. Release the cutting head lock when the grass shear + hedge trimmer fits
into place (Fig. 12).
3. Insert the connecting cord into the telescoping pole socket on the handle of the grass shear + hedge trimmer (Fig. 13).
4. To disconnect the grass shear + hedge trimmer from the telescoping pole, unplug the connecting cord from the telescoping
pole socket, and remove the grass shear + hedge trimmer from the pole head while pressing the cutting head lock (Fig. 14).
Pole Length Adjustment (Optional)
1. Loosen the telescopic lock by flipping it up (Fig. 17).
2. Pull the lower pole out or push it together to adjust to the desired length (Fig. 18).
3. Tighten the telescopic lock by latching it back down (Fig. 19).
NOTE: The cam-lock nut may need to be loosened slightly in order to adjust the telescoping pole length (Fig. 20). Use pliers or hex
key wrench, as needed.
Fig. 17
Telescoping lock
Fig. 19
Telescoping lock
Connecting
cord
Fig. 14
Cutting head lock
Grass shear + hedge
trimmer
Fig. 18
Fig. 20
Cam-lock nut
Hex key wrench
Pole head
Lower pole