Blaupunkt MX6000 Bedienungsanleitung Seite 17

Telescoping Pole Assembly (Optional)
Unlock the telescoping lock by flipping it up (open), and insert the lower pole into the upper pole. Make sure the groove in the end
of the lower pole is facing the opposite direction of the telescoping lock. Keep the power cord inside of the pole tubes (Figs. 8 – 9).
When the pole reaches the desired length, latch the telescoping lock by pushing it back down (Fig. 10).
Fig. 9
Upper pole
Attaching the Telescoping Pole (Optional)
!
WARNING! Make sure the power ON/OFF switches in both the unit and the telescoping pole are in OFF position before
attaching the telescoping pole.
1. Turn the telescoping pole upside down. Press the end of the cutting head lock; the front part of the lock will go up (Fig. 11).
Fig. 11
Cutting head lock
Fig. 8
Upper pole
Telescoping lock
Power cord
Lower pole
Telescoping lock
Lower pole
Groove
Fig. 10
Telescoping lock
Fig. 12
Grass shear + hedge
trimmer
Pole head