Space Isolator - Klarstein 10028519 Anleitung

SET:
Press "SET" button first and then press arrow buttons, the shining spot on the
screen of the remote control will switch among hour, minute & weekday (as shown
on Pic 2). Press arrow buttons to change the parameter to a idea time that you want
the machine work. During pre-setting, when the shining happens to 1-7 press „OK"
button; the presently shining spot will have a "beam" shining or extinguished; the
weekday with the "beam" shining is the present pre-setting. Press „ALL" button to
switch between selection of all or no selection of all.
During the setting, press the power button to quit; press the "SET" button to save the present setting.
FULL GO:
Press the "SET" button, the screen shows a shinning spot , then press the "STOP" button, you can see „FF60"
displaying with the first F flashing, press again the "SET" to stop flashing which indicates FULL GO function is
activated, so the machine can automatically clean when has been fully charged. To cancel the FULL GO func-
tion, first press the SET button to see „FF60" displaying on the screen with the first "F" flashing,then press
STOP and after you press the SET button again, the FULL GO function is canceled.
1 Signal transmitting
2 Power indicator
3 On/Off switch
4 Code check button
Note: You should check code before using the Space Isolator; otherwise it will fail to work.
Steps of code check
A: Turn off the cleaner, and turn on the Space Isolator (with power indicator on);
B: Keep holding the code check button on the Space Isolator;(Tip: the code check button is inside the hole, you
need to use auxiliary tools when hold the button)
C: Turn on the cleaner;
D: After the cleaner toots 2 or 3 times, release the code check button, then the code check set is finished
successfully.
E: If you fail to hear toot 2 or 3 times, twice during the code check, just repeat the above process.
Note: Place the space isolator against the wall, or it might be easily moved by the cleaner from side or back of
the space isolator, which would cause the machine cleans the confined area.
17

Space Isolator