Hitachi PJTX10W Bedienungsanleitung Seite 54

Example Of Computer Signal
Resolution
H × × V
720 × 400
640 × 480
640 × 480
640 × 480
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
800 × 600
800 × 600
832 × 624
848 x 480
1024 × 768
1024 × 768
1024 × 768
1280 × 960
1280 × 1024
•
NOTE Some computers may have multiple display screen modes. Use of some
of these modes will not be possible with this projector.
•
Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a computer.
•
Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
•
Although the projector can display signals with resolution up to UXGA (1,600 x
1,200), the signal will be converted to the projector's panel resolution before being
displayed. The best display performance will be achieved if the resolutions of the
input signal and projector panel are identical.
•
The image may not be displayed correctly when the input sync. signal is "Composite
Sync." or "Sync. on G".
•
Automatically adjustment may not function correctly with some input signals.
•
When the image resolution is changed on a computer, depending on an input,
automatic adjust function may take some time and may not be completed. In this
case, you may not be able to see a check box to select "Yes/No" for the new
resolution on Windows. Then the resolution will go back to the original. It might be
recommended to use other CRT or TFT monitors to change the resolution.
2
fH (kHz) fV (Hz)
37.9 85.0
31.5 59.9
35.0 66.7
37.9 72.8
37.5 75.0
43.3 85.0
35.2 56.3
37.9 60.3
48.1 72.2
46.9 75.0
53.7 85.1
49.7 74.5
29.8 60.0
48.4 60.0
56.5 70.1
60.0 75.0
60.0 60.0
64.0 60.0
Rating Signal mode
VESA TEXT
VESA VGA (60Hz)
Mac13"mode
VESA VGA (72Hz)
VESA VGA (75Hz)
VESA VGA (85Hz)
VESA SVGA (56Hz)
VESA SVGA (60Hz)
VESA SVGA (72Hz)
VESA SVGA (75Hz)
VESA SVGA (85Hz)
Mac16"mode
VESA W VGA (60Hz)
VESA XGA (60Hz)
VESA XGA (70Hz)
VESA XGA (75Hz)
VESA SXGA (60Hz)
VESA SXGA (60Hz)