JETTE joker Bedienungsanleitung Seite 14

GB
Adjusting the foot rest:
Press adjustment knob on both sides (Fig.14) and bring foot rest into
required position.
Attaching/removing the handle:
Fasten the handle in the openings of the frame (Fig.15). To remove, press
release button and pull it out (Fig.16).
Applying of the brake:
Press down brake arm to activate the brake (Fig.17). Push brake arm
upwards to release brake (Fig.18).
Caution: Always make use of the brake when stopping the buggy.
Height adjustment slider:
Press release button (Fig.19) on both sides of the sliders and adjust to
required height.
Folding together:
For easy folding, remove the seat part or cot from the frame. Then press
release button (Fig.20) and pull release levers (Fig.21) upwards on both
sides, afterwards fold the frame together. Finally, fasten the safety interlock
(Fig.1).
INFORMATION: The baby buggy can also be folded together with the seat part
erected. A folding with cot is not possible.
Placing of the carry cot:
Remove the mattress and pull the clamps outwards until they click into place
(Fig.22). Then place the mattress again. To fold, pull the clamps inwards
again (Fig.23).
Mounting/removing of the carry cot:
Place the carry cot on both openings on the frame (Fig.11) until they click
into place audibly.
CAUTION: Only mount the carry cot such that the child is facing rearwards,
as no safe fastening is possible otherwise (Fig.24).
To remove, press release button on both sides and pull upwards (Fig.25).