JETTE joker Bedienungsanleitung Seite 13

GB
Setting up:
Open the safety interlock (Fig.1). Draw frame apart until it clicks into place
audibly (Figure 2).
Fastening of the back wheels:
Press release button (Fig.3/A.) and place the wheel on the suspension
(Fig.3/B). To remove, press the release button and pull off the wheel (Fig.4).
Fastening of the front wheels:
Press release button (Fig.5/A.) and place the wheel on the suspension
(Fig.5/B). To remove, press the release button and pull off the wheel (Fig.6).
INFORMATION: Always attach the wheel in such way that the wheel nut is on
the inside.
Swivel wheel feature:
Turn the release wheel to the left to activate the swivel wheel function
(Fig.7). Turn the release wheel to the right to deactivate the swivel wheel
function (Fig.8).
Attaching the roof:
Fasten roof to the seat with the zipper (Fig.9). Then attach the roof clips on
both sides of the frame (Fig.10). Remove in reverse order.
Attaching/removing the seat part:
Fasten the seat part to both suspensions on the frame (Fig.11) until it clicks
into place audibly. The seat part can be attached in both directions. To
remove, press the adjustment knob on both sides and remove the seat part
from the frame (Fig.12).
Adjusting the seat position:
Press the adjustment knob on both sides (Fig.12) and adjust the seat into
required position.
Saftey belt:
To fasten the saftey belt, lock the belt buckles A+B at the centerpart C
(Fig.13). To open it, press the lateral clips and pull the belt buckles apart.
CAUTION: Always use the safety belt.