Hanhart Pioneer Bedienungsanleitung Seite 6

Simple time recording,
two-buttons watch model
Crown in position"I"
START
1
STOP Read the time
2
RESET TO ZERO
3
If you would like to record a time with your
Hanhart chronograph, you should use the
button "A" for the start and stop functions.
The red button "B" is used to reset the
chronograph after a measurement.
You start a time recording by pressing the
button "A". You stop the time recording by
pressing the button "A" a second time. The
centre seconds hand and the chronograph
minutes counter display (at 3 o'clock) as well
as the chronograh hours counter depending on
the model (at 9 o'clock). Press the red button
"B" to reset the hands to zero.
10
Aggregate time recording,
two-buttons watch model
Crown in position"I"
START
1
STOP Read the time
2
RESTART
3
STOP Read the time
4
RESTART
5
STOP Read the time
6
RESET TO ZERO
You start a time recording by pressing the
button "A". You interrupt the time recording
by pressing the button "A" a second time. You
then continue the time recording by actuating
the button "A" once more, and so on. Stopped
times are added together in this way. Press the
red button "B" to reset the hands to zero.
11