Caution; Preparing For Use; Cleaning And Sanitizing - Philips AVENT SCF334 Bedienungsanleitung

Always switch off the breast pump before you remove the pump body from your breast to release
-
the vacuum.
Never use any accessories or parts from other manufacturers or that Philips Avent does not specifically
-
recommend. This could lead to improper working of the appliance and could influence Electromagnetic
Compatibility (EMC). If you use such accessories or parts, your warranty becomes invalid.
Do not continue pumping for more than five minutes at a time if you do not succeed in expressing
-
any milk. Try to express at another time during the day.
If the process becomes very uncomfortable or painful, stop using the pump and consult your
-
breastfeeding advisor.
If the pressure generated is uncomfortable or causes pain, switch off the appliance, break the seal
-
between the breast and the pump body with your finger and remove the pump from your breast.
Never drop or insert any foreign object into any opening.
-

Caution

Caution to prevent damage to and malfunctioning of the product:
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
-
deformation of these parts.
Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer.
-
Although the breast pump is compliant with applicable EMC directives, it may still be susceptible
-
to excessive emissions and/or may interfere with other equipment. A consequence can be that
the breast pump switches off or goes into error mode. To prevent interference, keep other electric
equipment away from the breast pump during expressing (see 'Technical information').
There are no user serviceable parts inside the motor unit of the breast pump. No modification of
-
equipment is allowed. If you do, your warranty becomes invalid.
Do not short-cut the supply terminals of the batteries.
-

Preparing for use

Cleaning and sanitizing

The motor unit, the silicone tube, cap and the adapter do not require cleaning and sanitizing,
as they do not come into contact with breast milk. Clean and sanitize all other parts of the breast
pump before first use. Also clean these parts after each subsequent use and sanitize them before
each subsequent use.
Caution: Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer,
as this causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (first) use and after each subsequent use. Please check the list in the
General Description section to see which items are included with your breast pump.
Breast pump parts:
Silicone diaphragm
-
Pump body
-
Massage cushion
-
White valve
-
English
9