Before First Use; Intended Use; Attaching The Auxiliary Handle; Inserting/Changing The Disc - Westfalia 80 28 34 Bedienungsanleitung

Before first Use

Unpack the angle grinder and the accessory and check all parts for any
damage in transit. Dispose of packaging materials or store it out of reach of
children. Plastic bags etc. may become a deadly toy for children.

Intended Use

 This angle grinder is intended for cutting and grinding metal and stone with
the suitable discs.
 The device has been exclusively designed for privat use. It is not suitable
for continous commercial use.
 The intended use also includes an operation following the operating
instructions.
 Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks
and is regarded as use that is contrary to the intended purpose. The
operator is liable for any damage caused by improper use.

Attaching the Auxiliary Handle

Do not operate the angle grinder without the auxiliary handle (5). There are
three threaded mounting holes in the housing of the tool head, to which the
auxiliary handle (5) can be attached.

Inserting/Changing the Disc

Please Note! Always pull the
power plug before changing a
disc to avoid
starting.
1. Loosen the spindle with the
included face wrench (13).
Keep the shaft lock (1)
pressed to lock the drive
shaft and the disc.
2. Insert the cutting disc resp.
replace the
Make sure to attach the
inner flange first (12), than
the cutting disc (7) and
finally the outer flange (11).
Operation
accidental
worn disc.
Cutting Disc
27
Shaft Lock
Safety Hood
Inner Flange
Outer Flange