Medela SoftCup Gebrauchsanweisung Seite 3

3. Release the pads and some milk will enter the
reservoir.
4. Repeat filling steps 1–3 until the reservoir is
al most filled, approx imately up to the bottom of
the pads. As baby is fed, the reservoir will auto­
matically refill by squeez ing just below the pads.
Feeding the Baby
1. Hold feeder horizontally, with a slight angle
up wards on the bottom of the bottle. Posi tioning
is very similar to holding a pencil. Angle the fee­
der so the air that remains rises to the end of the
bottle. Angling the bottle in this manner is essen­
tial to the auto matic refill feature of the reservoir.
2. Begin the flow of milk by gently squeezing the
two pads on both sides of the reservoir. This will
push the milk in the feeding tip of the reservoir.
3. Use the tip of the reservoir to tickle baby's
mouth open. Lay the rim of the reservoir on
baby's lower lip.
4. Tip the feeder so that the milk pooling in the
reservoir is fed to baby.
The milk should be lapped by the baby and with
encouragement this will automatically happen.
Please seek consultation when using this product
and follow recommendations from professionals.
Cleaning and Sanitizing
the Feeder
Before first use and once daily
The disassembled parts of the feed er should be
boiled for 5 min., prefer ably in distilled water. When
used in hospitals all disassem bled parts can be
autoclaved to a maximum of 134 °C for 3 (or 18)
min. or 125 °C for 15 min. To avoid dam age dur ing
sterilization, sterilize parts without applying external
pressure on parts.