Using The Radio; Auxiliary Function; Product Information - Blaupunkt BSD-9001 Bedienungsanleitung

User manual
Silence the alarm momentarily
Press SNOOZE to turn the alarm off temporarily. The alarm will sound again when the snooze period is over.
Note: snooze time is 9 minutes.
Stop the alarm
Press ON/OFF: The alarm will stop, and will sound again 24 hours later.
Cancel Wake Setting
Press ALARM repeatedly until all alarm indicators disappear from the display.
SLEEP TO THE RADIO
In sleep mode, the radio will turn off automatically after a specified time.
In radio ON mode, press SLEEP to select the desired time before turn off among 120-90-60-45-30-15-00.
* Select "00" then the sleep function is OFF, SLEEP indicator disappear from display.
When in SLEEP mode, press SLEEP button to read the remaining sleep time.
SOUND PRESETS
When listening to the radio, press AUDIO button repeatedly to select desired sound preset: VOICE, MUSIC or NORMAL.

USING THE RADIO

Listen to the radio
• Press ON/OFF.
• Select the frequency band FM/MW/SW/LW by pressing BAND.
• Select the required radio station with the buttons
• Adjust the volume with the buttons VOLUME +/-.
• To switch the radio off, press ON/OFF.
To enhance radio reception ability:
FM/ SW: Extend the telescopic antenna.
MW/LW: Rotate the unit horizontally for optimum reception.
Saving Preset Stations
1. Tune to a station to be saved as a preset station (see "Listen to the radio").
2. Press MEMO once and you will see "M" and flashing "01" on the display.
3. Press Preset / to select a preset number.
4. Press MEMO to save station as selected preset number.
5. Repeat above steps to preset a maximum of 10 stations for each band respectively.
Selecting Preset Stations
Press Preset / to select a preset number.
RDS FUNCTION
When FM station with RDS is received, the station name (PS) is displayed. Press RDS button repeatedly to display the
program type (PTY), the radio text (RT), the frequency and the station name (PS).

AUXILIARY FUNCTION

• Connect an audio device to the LINE IN jack, using an audio cable (not supplied).
• Switch the appliance on.
• Use the device's controls directly.

PRODUCT INFORMATION

Power consumption:
Frequency Range:
5W
FM 87.5-108.0 MHz
MW 530-1600 KHz
LW 150-280 kHz
SW 5.80-10.0 MHz
and .
BSD-9000 / BSD-9001
9