Switch-On And Switch-Off; Pairing - AKE Stealth - Bluetooth - Helmset NG Bedienungsanleitung

with this NG.
The Stealth Bluetooth Helmet Set NG is smartphone-capable, therefore it is
possible to alternatively connect each to a smartphone. It supports the voice
control at many smartphones.
The Stealth Bluetooth Helmet Set NG can alternatively
be connected via AKE Bluetooth Extension Kit to a
cable motorbike intercom system (e.g. Baehr, Harley,
Honda, etc.).

Switch-on and switch-off

Press the multi functional button (8) for approx. 3 sec.
to turn on the Bluetooth helmet set. The function
display will flash blue and is than flashing to indicate availability.
Please note: When used in intercom mode, the intercom connection has to be
activated after switching on two Stealth Bluetooth Helmet Sets NG. For that, please
press the multi functional button at one of the Bluetooth helmet sets. The intercom
will automatically be connected after approx. 2 - 3 seconds.
Press the multi functional button for approx. 3 sec. to turn off the Bluetooth helmet
set. The switching off is indicated by a red light showing in the display.

Pairing

Before using your Stealth Bluetooth Helmet Set NG
pair it with your Bluetooth device.
Please start with a switched-off Bluetooth helmet set. Turn off all other Bluetooth
devices not needed for the pairing.
1. Press multi functional button (8) for approx. 5 seconds. Release button when
indicator light flashes red and blue alternately. The Bluetooth helmet set is now
ready to be paired with any compatible Bluetooth device.
2. Now put the respective Bluetooth device into pairing mode.
To pair with a second Stealth Bluetooth Helmet Set NG, you must press one of
the two units additional 1 x short the multifunction key (the LEDs than flash
slower at this helmet set).
At mobile phone or navigation systems you usually find the pairing mode in the
menu "searching for Bluetooth devices in the area". If using this option, please
select the "AKE Stealth-HS-NG" for pairing. When asked for a code word,
please enter 0000. For pairing other Bluetooth devices, please refer to the user
manual of the respective devices.
for the first time, you have to
25