Ibiza sound DJM-102 Bedienanleitung Seite 6

23) MIC BASS
This knob adjusts the bass tone of the microphone.
24) MIC LEVEL CONTROL
Let you control the MIC level as they enter the mix.
25) MIC TALK OVER
There are talk over, MIC on and MIC off function. The Sound Pressure Level of audio from input sources
will be decreased while TALK OVER mode is set.
26) MIC CUE
Use it to monitor the MIC input source.
27) KILL FOR BASS
Press it to kill microphone bass volume, and indicator light.
28) CHANNEL ASSIGN SELECTOR
Let you select the input source to be mixed by the crossfader control.
29) CROSSFADER
Allow you to smoothly switch between the input sources assigned to channel A and channel B.
30) SOUND EFFECTS
Let you create special sound performance mixes from the eight preprogrammed special effects.
31) SOUND EFFECTS SPEED CONTROL
Let you control the pitch of the selected sound effect.
32) SOUND EFFECTS VOLUME CONTROL
Let you control the volume level of the sound effect within the mix.
33) ECHO LEVEL CONTROL
Control the depth of the echo effect.
34) SOUND EFFECTS CUE
Let you monitor the selected sound effect before mixing it in.
35) ECHO REPEAT CONTROL
Let you control the time period during which the echo is repeated.
36) HEADPHONE CUE/PGM CONTROL
Allow you to listen simultaneously or separately to the CUE material or the active program.
37) HEADPHONE JACK
Accept headphones with 1/4" plug.
38) HEADPHONE LEVEL CONTROL
Let you to control the volume level of headphone.
39) EFFECT SWITCH (SEND/RECEIVE)
Let you connect a sound effect device, such as reverb, sampler, etc. and either play the signal from it
or play another input through it.
-5-