Ibiza sound DJM-102 Bedienanleitung Seite 5

4) KILL FOR TREBLE
Press it to kill microphone treble volume, and indicator light.
5) KILL FOR MID
Press it to kill microphone middle volume, and indicator light.
6) EQUALIZER
Allow you to tailor the mixer output to suit be cut or boost by up to 10 dB.
7) CHANNEL GAIN
This rotary control adjusts the input level.
8) CHANNEL CUE
Use it to monitor the selected audio input source.
9) CHANNEL INPUT SELECTOR
Let you to choose the input source to play for each channel.
10) CHANNEL LEVEL CONTROL
Let you control mixer's overall channel volume level.
11) DISPLAY METER
Indicate the levels of left and right master channels.
12) MASTER MONO/STEREO SELECTOR
Select mono mode or stereo mode.
13) MASTER BALANCE CONTROL
Let you adjust master balance.
14) MASTER LEVEL CONTROL
Let you control mixer's overall master volume level.
15) ZONE MONO/STEREO SELECTOR
Select mono mode or stereo mode.
16) ZONE BALANCE CONTROL
Let you adjust zone balance.
17) ZONE LEVEL CONTROL
Let you control mixer's overall zone volume level.
18) ECHO ON/OFF
Turn echo on or off.
19) ECHO DELAY CONTROL
Let you adjust the delay time for the echo.
20) 12V POWER SUPPLY JACK
Allow you to connect 12v power supply via this jack.
21) POWER SWITCH
Use this switch to turn on the unit after all input devices are already connected to prevent damage to
your equipment. Turn the mixer on before you turn on amplifiers and turn of amplifiers before you turn
off the mixer.
22) EQUALIZER ON/OFF
Press it to turn equalizer on, the indicator light.
-4-