Programming; Screen Brightness Function; Advanced Functionality; Anti Legionnaire's Disease - Rointe KYROS Bedienungsanleitung

show as SEL1, SEL2, SEL3.... We can go forwards and backwards using the button
and . Press
4. Pressing
the or , buttons. The hours selected will show as (0h, 1h, 2h,...). By pressing the
button, we can select hour by hour the mode required: COMFORT, ECO or OFF.
5. To finish the programming, press
buttons.

3.8. Screen brightness function

You can change the brightness of the screen by pushing the button
the product is in manual mode. Entering this mode you will see the following screen:
In ON mode you can increase or decrease the brightness of the screen by using the
buttons.
You can change the "Standby" mode brightness by pushing the button
to the "STAND-BY" position. You can then adjust the brightness by pushing the same
keys.
To finish the programming wait for 10 seconds without pressing any buttons.

4. ADVANCED FUNCTIONALITY

4.1. Anti Legionnaire's Disease

Our KYROS is designed with safety in mind, and all the anti legionnaires' disease regulations
are complied with. Regularly, the water heater is automatically set to 60ºC for one hour.
Whilst this mode is active, you will see the following screen:
to select the day or days that we wish to program.
, takes us to the hours we wish to program. To change the hours use
or leave it for 30 seconds without pressing any
for 3 seconds when
and
to move the frame
and
25