Blocking The Control Panel; Temperature Selection; Manual / Automatic Functions; Manual Function - Rointe KYROS Bedienungsanleitung

KYROS
the number of times it is pressed. With the buttons
settings.
To leave the time and date adjust feature, wait 30 seconds or press
select.

3.4. Blocking the control panel

By pressing the keys
panel, the control panel symbol is activated, and the keys will not respond when pressed.
The following symbol will appear on the screen if any button is pushed:
To unblock, press again the keys

3.5. Temperature selection

By pressing or
than the one set, the water heater comes on, the

3.6. Manual / Automatic functions

By pressing we change between the Manual and Automatic functions.
When the Manual function is selected, the symbol
Automatic function is selected, the symbol

3.6.1. Manual function

This enables to choose between the modes of operation COMFORT, ECO and ANTI-
FROST, changing the temperature as indicated in Section 1.5.

3.6.2. Automatic function

This mode activates the programming set on the water heater.

3.7. Menu / Programming function

Pressing for 3 seconds allows you to program the water heater directly:
1. Select the COMFORT temperature setting (55ºC to 73ºC), using
symbol and the temperature will flash.
2. Press and we can select using
The symbol
3. After pressing the button
24
and , at the same time for 3 seconds, we block the control
and
we change the temperature. When the water temperature is lower
ICON MODE
COMFORT
ECO
ANTI-FROST
and the temperature will flash.
once again, the days of the week will start flashing and
and we can alter the current
, at the same time for 3 seconds.
symbol appearing.
appears on the display. When the
appears on the display.
TEMPERATURE RANGE
55ºC – 73ºC
40ºC – 54.5ºC
8ºC
and the ECO temperature (40ºC to 54.5ºC).
after the date
and . The